Table 12-20 Mpca: Power Meter Presets - Keysight N1911A Programming Manual

Function
Lower window/lower measurement (LL)
Feed
Measurement
[a] For further information refer to
MCPA
The following table shows the power meter presets when <character_data> is set
to MCPa. Commands not listed are preset according to their DEFault values (for
further information refer to
Table 12-20 MPCA: Power Meter Presets
Command
Frequency
[SENS[1]]|SENS2:FREQ[:CW|:FIX]
Sensor measurement mode
[SENS[1]]|SENS2:DET:FUNC
Sensor video bandwidth setup
[SENS[1]]|SENS2:BAND|BWID:VID
Gate Setup
[SENS[1]]|SENS2:SWE[1]|2|3|4
:OFF:TIME
[SENS[1]]|SENS2:SWE[1]|2|3|4
:TIME
Trigger setup
N1911A/1912A P-Series Power Meters Programming Guide
Secondary Channel Sensor
No Sensor
Gate 1 primary channel1
Peak
"Primary and Secondary Channels"
Setting
+1900.000 MHz
NORM
E9321A/25A: DEF
E9322A/26A: DEF
E9323A/27A: DEF
N1921/2A: HIGH
Gate 1: 0 s
Gates 2 - 4: 0
Gate 1: 10 ms
Gates 2 - 4: 0
Non P-Series or E9320
Sensor
Secondary channel
Avg
on page 527.
Table 12-1).
SYSTem Subsystem
P-Series and E9320 Sensor
Gate1 secondary
[a]
[a]
channel (Channel B)
Avg
Comments
Frequency setting
Measurement mode
Sensor video bandwidth
Delay between trigger point and time
gated period.
Length of time gated period for time gated
measurements.
12
557