Keysight N1911A Programming Manual page 470

11 STATus Subsystem
Parameters
Type
NRf
non-decimal numeric
Query
:ENABle?
The query returns a 15 bit decimal-weighted number representing the contents of
the Enable Register of the SCPI Register Set being queried. The format of the
return is <NR1> in the range of 0 to 32767 (2
:NTRansition <NRf>|<non-decimal numeric>
This command sets the Negative Transition Register of the SCPI Register Set you
require to control. The parameter value, when rounded to an integer and
expressed in base 2 has its first 15 bits written into the Negative Transition
Register of the SCPI Register Set concerned. The last bit (bit 15) is always set to 0.
470
Description
The value used to set the Enable Register. 0 to 2
N1911A/1912A P-Series Power Meters Programming Guide
Range of Values
16
–1
15
–1).