Service:sensor[1]|2:Snumber - Keysight N1911A Programming Manual

P-series power meters

Hide thumbs Also See for N1911A:

Table of Contents

SERVice Subsystem

SERVice:SENSor[1]|2:SNUMber?

This query returns the serial number for P-Series, E-Series sensors and N8480

Series sensors. Serial number information is stored in the sensor's EEPROM.

SERV:SENS2:SNUM?

Error Messages

– If no sensor is connected, error –241, "Hardware missing" occurs.

– If a a sensor other than a P-Series, N8480 Series or E-Series power sensor is

connected, error –241 "Hardware missing" occurs.

N1911A/1912A P-Series Power Meters Programming Guide

This query returns the serial number of the

P-Series, E-Series sensor or N8480 Series

sensor connected to Channel B.

Table of Contents