5
DISPlay Subsystem
DISPlay[:WINDow[1]|2]:TRACe:FEED <character_data>
This command selects which channel's trace is displayed in the specified window.
Syntax
DISP
Parameters
Item
character_data
Example
DISP:WIND2:TRAC:FEED "SENS1" This command selects Channel A's trace to
Reset Condition
On reset, the value is set to:
– Upper window: SENS1
– Lower window (dual channel only): SENS2
258
1
:WIND
2
Description/Defaul t
Identifies which channel's trace is displayed.
– SENS1: Channel A
– SENS2: Channel B
:TRAC
:FEED
be displayed in the lower window.
N1911A/1912A P-Series Power Meters Programming Guide
Space
character_data
Range of Values
"SENS1"
"SENS2"