9
PSTatistic Subsystem
Reset Condition
On reset, the CCDF cummulative counts will be set to the default value, 100 M
samples.
Query
PSTatistic[1]|2:CCDF:COUNt?
The query returns the current numeric value of the CCDF cummulative count for
the respective channel selected.
Query Example
PST1:CCDF:COUN?
Error Messages
– If no sensor or wrong sensor is connected to the channel, error –241
– If channel is not in free-run acquisition mode, error –221 "Settings conflict"
– If user inputs a count that is lesser than 100 M or greater than 10 G, error –222
342
"Hardware missing" occurs.
occurs.
"Data out of range" occurs. Any input count that is within range will be
normalized and round down to the nearest 100 M.
N1911A/1912A P-Series Power Meters Programming Guide
This command queries the numeric value of
CCDF cummulative counts for Channel A.