Status:operation:llfail[:Summary] - Keysight N1911A Programming Manual

11 STATus Subsystem

STATus:OPERation:LLFail[:SUMMary]

The operation status lower limit fail summary register set contains information on
the lower limit fail status of the power meter.
The following bits in these registers are used by the power meter:
Bit Number Decimal Weight
0 -
1 2
2 4
3 8
4 16
5 32
6 64
7-15 -
The appropriate bits are set if a channel lower limit test fails or a window lower
limit test fails.
These bits are cleared if a measurement is made and the test is enabled and
passes.
Syntax
478
Definition
Not used
Channel A LLFail Status
Channel B LLFail Status (N1912A only)
Upper window LLFail Status
Lower widow LLFail Status
Upper window lower measurement LLFail Status
Lower window lower measurement LLFail Status
Not used
:OPER
STAT
:SUMM
:LLF
N1911A/1912A P-Series Power Meters Programming Guide