System:communicate:lan:current:dgateway - Keysight N1911A Programming Manual

SYSTem:COMMunicate:LAN:CURRent:DGATeway?

This command returns the current setting of the LAN IP router/gateway address in
use by the power meter.
If DHCP or AutoIP are enabled and successful, then one of these IP address
NOTE
modes assigns the LAN IP router/gateway address, otherwise it is the static LAN
IP router/gateway address
Syntax
SYST
Example
SYST:COMM:LAN:CURR:DGAT?
N1911A/1912A P-Series Power Meters Programming Guide
:COMM :LAN :DGAT
:CURR
This command queries the current setting of
the LAN IP router/gateway address.
SYSTem Subsystem
?
12
499