Pstatistic:ccdf:gaussian[:State] <Boolean - Keysight N1911A Programming Manual

PSTatistic:CCDF:GAUSsian[:STATe] <boolean>
This command is used to turn on or off the Gaussian trace and it is independent of
the channels attached.
This command is only applicable when P-Series sensors are present and the
NOTE
following conditions are met:
– Free-run acquisition mode is selected
– NORMal or DOUBle measurement speed setting is chosen
– Expanded window is enabled (not full CCDF screen window)
Syntax
Example
PST:CCDF:GAUS ON
PST:CCDF:GAUS OFF
Reset Conditions
On reset, the Gaussian trace will be cleared (OFF).
N1911A/1912A P-Series Power Meters Programming Guide
:CCDF
PST
:STAT
:GAUS
This command turns on the Gaussian trace.
This command turns off the Gaussian trace.
PSTatistic Subsystem
Space
0|OFF
1|ON
?
9
319