Related Manuals for Keysight N1914A
Summary of Contents for Keysight N1914A
- Page 1 D A T A S H E E T Keysight N1913A and N1914A EPM Series Power Meters E-Series and 8480 Series Power Sensors...
-
Page 2: Table Of Contents
N1913A/14A EPM Series Power Meters Ordering Information ������������������������������������������������������������������ 12 E-Series Power Sensor Specifications �������������������������������������������������������������������������������������������������������� 13 E-Series CW Power Sensor Specifications ������������������������������������������������������������������������������������������������� 13 E-Series E9300 Average Power Sensor Specifications ������������������������������������������������������������������������������ 16 848xD Series Diode and 8483A Thermocouple Power Sensor Specifications �����������������������������������������22 Page 2 Find us at www.keysight.com... -
Page 3: Do More With New-Generation Epm Series Power Meters
– Relative accuracy: ± 0�04 dB 1� Additional two optional USB channels available (see Ordering Information, page 10)� 2� N1913A is backward compatible with the 436A and 437B, while N1914A is compatible with 438A� logarithmic, ± 1% linear As signals become more complex, it becomes more difficult to make fast, accurate power measurements�... -
Page 4: Take A Closer Look
Take a Closer Look N1914A front panel Soft keys provide menu selection Industry’s first high-resolution Arrow keys and Select allow positioning of the cursor color LCD in an average power for character selection and editing meter Numeric keypad Run/Stop enables single-shot... -
Page 5: N1913A/14A Epm Series Power Meter: Applications And Compatible Sensors
Average Average Average Average (except U2049X Series & in only only only only only only Average Mode only) 1� The N1913A/4A power meters are compatible with all 8480 Series power sensors, including discontinued models� Page 5 Find us at www.keysight.com... -
Page 6: N1913A/14A Epm Series Power Meters Performance Characteristics
Multiplier” for the appropriate mode (normal or x2) and number of averages to determine the total measurement noise value. For example: For a Keysight 8481D power sensor in normal mode with the number of averages set to 4, the measurement noise is equal to: (< 45 pW x 2.75) = < 124 pW Page 6 Find us at www.keysight.com... - Page 7 With N1913A power meter Normal: 20 readings/second x2: 40 readings/second Fast: 400 readings/second, for Keysight E- Series power sensors only With N1914A power meter The measurement speed is reduced, for example, with both channels in FAST mode, the typical maximum measurement speed is 200 readings/second.
- Page 8 – N1913A: 10 ms – N1914A: 20 ms 1� Settling time: 0 to 99% settled readings over the GPIB� 2� When a power step crosses through the sensor’s auto-range switch point, add 25 ms� Refer to the relevant sensor manual for switch point information�...
- Page 9 70 ms 120 ms 0 dBm –20 dBm 400 ms -10 dBm -30 dBm Low power 3.4 s 6.5 s path -20 dBm -40 dBm 6.8 s 13 s Minimum With E-Series E9300B/01B/00H/01H sensor Page 9 Find us at www.keysight.com...
- Page 10 8.2 kg (18.3 lb) Rear panel connectors Recorder outputs Analog 0 to 1 volt, 1 kΩ output impedance, BNC connector. N1914A recorder outputs are dedicated to channel A and channel B. GPIB, USB 2.0 and Interfaces to allow communication with an external controller...
- Page 11 SH1, AH1, T6, TE0, L4, LE0, SR1, RL1, PP1, DC1, DT1, C0 1� Characteristics describe product performance that is useful in the application of the product, but is not covered by the product warranty� Page 11 Find us at www.keysight.com...
-
Page 12: N1913A/14A Epm Series Power Meters Ordering Information
436A and 437B code compatibility for N1913A. Post purchase upgrade – USB cable Type A to Mini-B, 6 ft only. N6902A-1FP 438A code compatibility for N1914A. Post purchase upgrade only. Power sensor cables 11730A Power sensor cable: 1.5 m/5 ft 11730B Power sensor cable: 3.0 m/10 ft... -
Page 13: E-Series Power Sensor Specifications
Hard copy Japanese localization User’s Guide and Programming Guide N1913A-CD1 Documentation Optical Disk (consists of documentation CD-ROM and Keysight Instruments Control DVD) E-Series Power Sensor Specifications The E-Series of power sensors have their calibration factors stored in EEPROM and operate over a wide dynamic range� They are designed for use with the EPM Series of power meters and two classes of sensors are available: –... - Page 14 ISO/TAG4 Guide� The uncertainty data reported on the calibration certificate is the expanded uncertainty with a 95% confidence level and a coverage factor of 2� Page 14 Find us at www.keysight.com...
- Page 15 Mechanical characteristics such as center conductor protrusion and pin depth are not performance specifications� They are, however, important supplemental characteristics related to electrical performance� At no time should the pin depth of the connector be protruding� Page 15 Find us at www.keysight.com...
-
Page 16: E-Series E9300 Average Power Sensor Specifications
E9301H 10 MHz to 6 GHz 10 MHz to < 6 GHz : 1.15 10 MHz to < 6 GHz : 1.17 3.16 W avg Type-N (m) 100 W pk 100 W.μS per pulse Page 16 Find us at www.keysight.com... - Page 17 Typical SWR, 10 MHz to 18 GHz (25 °C ± 10 °C) for E9300B and Typical SWR, 10 MHz to 18 GHz (25 °C ± 10 °C) for E9300H and E9301B sensors� E9301H sensors� Page 17 Find us at www.keysight.com...
- Page 18 ± 0.8% –0.2 –10 to 0 dBm ± 0.65% –0.4 0 to +10 dBm ± 0.55% –0.6 +10 to +20 dBm ± 0.45% –0.8 +20 to +26 dBm ± 0.31% –1 –10 –5 Power (dBm) Page 18 Find us at www.keysight.com...
- Page 19 +20 dBm B–30 dBm +20 dBm +44 dBm H–50 dBm 0 dBm +30 dBm Figure 2� Relative mode power measurement linearity with an EPM Series power meter, at 25 °C ± 10 °C (typical)� Page 19 Find us at www.keysight.com...
- Page 20 2� Within 1 hour after zero set, at a constant temperature, after a 24-hour warm-up of the power meter with power sensor connected� 3� The number of averages at 16 for normal mode and 32 for x2 mode, at a constant temperature, measured over a one minute interval and two standard deviations� Page 20 Find us at www.keysight.com...
- Page 21 Mechanical characteristics such as center conductor protrusion and pin depth are not performance specifications� They are, however, important supplemental characteristics related to electrical performance� At no time should the pin depth of the connector be protruding Page 21 Find us at www.keysight.com...
-
Page 22: 848Xd Series Diode And 8483A Thermocouple Power Sensor Specifications
– – – – – – – – – – – – – – – – – – – – – – – – – – 1� These uncertainties only apply to Option 033� Page 22 Find us at www.keysight.com... - Page 23 The 11708A is factory set to 30 dB ± 0�05 dB at 50 MHz, traceable to NIST� SWR < 1�05 at 50 MHz� 3� The 8480 Series sensors in the table do not include discontinued models� Page 23 Find us at www.keysight.com...
- Page 24 For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Page 24 Find us at www.keysight.com This information is subject to change without notice. © Keysight Technologies, 2019, Published in USA , September 4, 2019, 5990-4019EN...