[Sense[1]]|Sense2:Average2[:State] <Boolean - Keysight N1911A Programming Manual

[SENSe[1]]|SENSe2:AVERage2[:STATe] <boolean>
This command is used to enable and disable video averaging for the P-Series or
E9320 sensor.
Syntax
Example
AVER2 1
Reset Condition
On reset, averaging is enabled.
Query
[SENSe[1]]|SENSe2:AVERage2[:STATe]?
The query enters a 1 or 0 into the output buffer indicating the status of averaging.
– 1 is returned when averaging is enabled.
– 0 is returned when averaging is disabled.
N1911A/1912A P-Series Power Meters Programming Guide
:
SENS
1
SENS2
AVER2 :STAT
This command enables video averaging on
Channel A.
SENSe Subsystem
Space
0|OFF
1|ON
?
10
383