Pstatistic:ccdf:marker[1]|2:Data - Keysight N1911A Programming Manual

PSTatistic:CCDF:MARKer[1]|2:DATa?

This command is used to retrieve the power and probability values at the current
marker position at any trace the marker is positioned.
This command is only applicable when P-Series sensors are present and the
NOTE
following conditions are met:
– Free-run acquisition mode is selected
– NORMal or DOUBle measurement speed setting is chosen
Syntax
Example
PST:CCDF:MARK1:DAT?
Reset Condition
On reset, the marker 1 and marker 2 will be set back to their default positions.
Error Messages
– If command is executed in other window besides CCDF window, error –221
N1911A/1912A P-Series Power Meters Programming Guide
PST
:CCDF
"Settings conflict: Requires CCDF window" occurs.
1
:MARK
2
This command returns the power and
probability values at marker 1.
PSTatistic Subsystem
?
:DAT
9
325