Keysight N1911A Programming Manual page 615

P-series power meters

Hide thumbs Also See for N1911A:

Table of Contents

Description/Defaul t

character_data

– HRESolution: high resolution. The complete capture buffer at the internal

– MRESolution: medium resolution. A subset of the capture buffer - the buffer

– LRESolution: low resolution. A subset of the capture buffer - the buffer

TRAC:DATA? HRES

Error Messages

If TRAC:STAT is off, the error –221, "Settings Conflict" occurs.

The TRIG:SOUR must be set to something other than IMM, and INIT:CONT must

be set to off.

N1911A/1912A P-Series Power Meters Programming Guide

sample rate. The number of points in this trace is not fixed, as it is affected by the

SENS:TRACe:TIMe setting.

contents are decimated to 1000 data points.

contents are decimated to provide 230 data points. This is the same number of

data points as the power meter uses to display the trace on the front panel. Hence,

the LRES command can be used to replicate the power meter's display.

This command returns the trace data for

Channel A at high resolution.

TRACe Subsystem

Range of Values

Chapters

Table of Contents