Trigger[:Sequence]:Level <Numeric_Value - Keysight N1911A Programming Manual

14 TRIGger Subsystem
TRIGger[:SEQuence]:LEVel <numeric_value>
This command sets the power level at which a trigger event is recognized.
Syntax
Parameters
Item
numeric_value
[a] If a channel offset has been previously set, a higher numeric value is permitted.
666
TRIG :SEQ
Description/Defaul t
The power level at which a trigger event is recognized.
– DEF: the default value is 0 dBm
Units are resolved to 0.1 dBm.
:LEV Space
See"Setting Offsets"
N1911A/1912A P-Series Power Meters Programming Guide
numeric_value
DEF
?
[a]
Range of Values
–40 to 20 dBm
DEF
on page 61 for more information.