Figure 1-5 Limits Checking Results; Table 1-3 Range Of Values For Window Limits; Checking For Limit Failures - Keysight N1911A Programming Manual

1 Power Meter Remote Operation
+10 dBm
+4 dBm
Figure 1-5
The range of values that can be set for the upper and lower limits and the default
values depends on the measurement units in the currently measurement line - see
Table
Table 1-3 Range of Values for Window Limits
Window
Units
dB
dBm
%
W

Checking for Limit Failures

There are two ways to check for limit failures:
1 Use the SENSe:LIMit:FAIL? and SENSe:LIMit:FCOunt? commands for
64
Amplitude
o
o
Limits Checking Results
1-3.
Maximum
+200 dB
+230 dBm
999.9 X%
100.000 XW
channel limits or the
N1911A/1912A P-Series Power Meters Programming Guide
Fail
o
o o
o
o
Fail
Minimum
–
180 dB
–
150 dBm
100.0 a%
1.000 aW
Frequency
Defaul t
Maximum
60 dB
90 dBm
100.0 M%
1.000 MW
Minimum
–
120 dB
–
90 dBm
100.0 p%
1.000 pW