Pstatistic:ccdf:marker[1]|2:X <Numeric_Value - Keysight N1911A Programming Manual

9 PSTatistic Subsystem
PSTatistic:CCDF:MARKer[1]|2:X <numeric_value>
This command is used to set the current marker X-axis position at the selected
trace.
This command is only applicable when P-Series sensors are present and the
NOTE
following conditions are met:
– Free-run acquisition mode is selected
– NORMal or DOUBle measurement speed setting is chosen
– Expanded window is enabled (not full CCDF screen window)
Syntax
PST
Parameters
Item
numeric_value
[a] The marker will be placed at the point nearest to the specified X-axis position if that particular X value is not available.
326
:CCDF
:MARK
Description/Defaul t
The current marker X-axis position
– Maximum Value: 50 dB. The value will be set to 0 if negative
value is inserted.
N1911A/1912A P-Series Power Meters Programming Guide
1
Space
: X
2
[a]
.
numeric_value
Range of Values
< 50