Example
SENS:TRAC:AUT
SENS2:TRAC:AUT
Reset Condition
On reset, X Start = 0 s, X Scale = 10 ms, Y Max = 20 dBm, Y Scale = 7 dB.
Error Messages
– If no sensor or wrong sensor is connected to the channel, error –241
– If channel is not in trigger acquisition mode, error –221 "Settings conflict"
N1911A/1912A P-Series Power Meters Programming Guide
"Hardware missing" occurs.
occurs.
This command triggers the Auto Scaling for
Channel A.
This command triggers the Auto Scaling for
Channel B.
SENSe Subsystem
10
455