Table 17-6 Ppe Mapping - Keysight N1911A Programming Manual

17 IEEE 488.2 Command Reference
PPE
Once the power meter has received a PPC command, the PPE (Parallel Poll
Enable) secondary command configures the power meter to respond to a parallel
poll on a particular data line with a particular level.
Table 17-6 PPE Mapping
Bit Weight
0 1
1 2
2 4
3 8
4 16
5 32
6 64
7 128
PPU
The PPU (Parallel Poll Unconfigure) command disables the power meter from
responding to a parallel poll. This is effectively a universal disable.
756
Meaning
Bit positions for response:
000 (bit 0), 001 (bit 1), 010 (bit 2), 011 (bit 3), 100 (bit 4), 101 (bit 5), 110 (bit 6),
111 (bit 7)
Sense bit
0 - response bit is cleared during a parallel poll if requesting service.
1 - response bit is set during a parallel poll if requesting service.
Always 0
Always 1
Always 1
Always 0
N1911A/1912A P-Series Power Meters Programming Guide