Keysight N1911A Programming Manual page 453

Reset Condition
On reset, the duration is set to 100 µs.
Query
SENSe[1]|SENSe2:TRACe:TIME?
The query returns the current duration of the trace.
Query Example
SENS2:TRAC:TIME?
Error Messages
– If the command is used when a sensor other than a P-Series or E9320 power
– If the command is used when an E9320 sensor is connected and set to
N1911A/1912A P-Series Power Meters Programming Guide
sensor is connected, error –241, "Hardware missing" occurs
AVERage mode rather than NORMal mode, the error –221, "Settings Conflict"
occurs.
This command queries the current duration
of the trace.
SENSe Subsystem 10
453