12
SYSTem Subsystem
SYSTem:COMMunicate:LAN:CURRent:ADDRess?
This command returns the current setting of the IP address in use by the power
meter.
If DHCP or AutoIP are enabled and successful, then one of these IP address
NOTE
modes assigns the IP address, otherwise it is the static IP address.
Syntax
Example
SYST:COMM:LAN:CURR:ADDR?
498
:COMM
SYST
:LAN
:CURR
This command queries the current setting of
the IP address.
N1911A/1912A P-Series Power Meters Programming Guide
?
:ADDR