Display Format
BIN COUNT DISPLAY Page
BIN COUNT DISPLAY Page
When you press the [Display Format] key and BIN COUNT softkey, the BIN
COUNT DISPLAY page is displayed. On this page, the comparator's count
results are displayed (The field in parentheses is used for setting).
•
This page also provides the following information in the monitor areas (each
monitor area looks like a field, but is not). These conditions can be set from the
LIMIT TABLE SETUP page. For more details, refer to
Page" on page
•
•
•
•
•
Figure 3-10
each field on this page.
You can set it so that a beep sounds when the sorting result is output. For
details, refer to
Keysight E4980A/AL Precision LCR Meter
Counter function ON/OFF (COUNT field)
134.
Measurement Function (FUNC)
Nominal Value (NOM)
Test Frequency (FREQ)
Bin Sorting Low/High Limits (LOW/HIGH)
BIN Sorting Results (RESULT)
shows the available fields and the softkeys that correspond to
"Beep Feature" on page
"LIMIT TABLE SETUP
143.
79