Table of Contents
Advertisement
Running Modular SA application
Display Annotations
Display Annotations
This section describes the display annotation as it is on the Spectrum Analyzer
Measurement Application display. Other measurement application modes have some
annotation differences.
Item
1
Measurement bar - Shows general measurement
settings and information.
measurement.
Some measurements include limits that the data is
tested against. A Pass/Fail indication may be shown in
the lower left of the measurement bar.
2
Active Function (measurement bar) - when the current
active function has a settable numeric value, it is
shown here.
3
Display Name - Shows the location of the module
with which the application is running. If there is
only one chassis is used, it shows "Slot
<number>", otherwise, it shows "Chassis
<number> - Slot <number>"
50
Description
Indicates single/continuous
Function Keys
All the keys in the Analyzer Setup
part of the front panel.
Currently selected front panel key.
None
Advertisement
Table of Contents
