Instrument Retrofit Requirements; U1832A/B/C And U1833A/B/C/D Enr Format Details - Keysight U1832A User Manual

Usb noise sources
Table of Contents

Advertisement

2
Installation

Instrument Retrofit Requirements

The Keysight USB Noise Sources works with the X-Series Signal Analyzers (CXA,
EXA, MXA, PXA, and UXA), and the Noise Figure Analyzers (N897xB) for noise
figure measurement application.
For more information on the instruments operation, refer to the User's Guide at:
– www.keysight.com/find/signalanalyzers, for X-Series Signal Analyzers
– www.keysight.com/find/nfa, for Noise Figure Analyzers
For X-Series Signal Analyzers, the instrument firmware version must be A.30.05
NOTE
or higher, to be used with the U1832A/B/C and U1833A/B/C/D.

U1832A/B/C and U1833A/B/C/D ENR Format Details

An ENR file:
– Includes all data currently supplied on the printed noise source calibration
– Can be viewed and edited using a standard text editor (for example, Wordpad).
– Is simple to create and interpret.
– Is easily printable.
– Is easily imported into Microsoft Excel.
22
report.
Keysight U1832A/B/C and U1833A/B/C/D User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

U1832bU1832cU1833aU1833bU1833cU1833d

Table of Contents