Service Management Tasks; Modifying Ies Service Parameters; Disabling An Ies Service - Alcatel-Lucent 7705 Service Manual

Service Management Tasks

Service Management Tasks
This section discusses the following service management tasks:

Modifying IES Service Parameters

Existing IES service parameters can be modified, added, removed, enabled, or disabled.
To display a list of customer IDs, use the show>service>customer command.
Enter the parameters (such as description, interface information, or SAP information), and
then enter the new information.
The following is an example of changing the IP MTU size.
Example:

Disabling an IES Service

An IES service can be shut down without deleting the service parameters.
Use the
CLI Syntax: config>service# ies service-id
Example:
Page 348
• Modifying IES Service Parameters
• Disabling an IES Service
• Re-enabling an IES Service
• Deleting an IES Service
A:ALU-41>config>service# ies 5
A:ALU-41>config>service>ies# interface "testname"
A:ALU-41>config>service>ies>if# ip-mtu 1517
A:ALU-41>config>service>ies>if# exit
command to shut down an IES service.
shutdown
shutdown
A:ALU-41>config>service# ies 5
A:ALU-41>config>service>ies# shutdown
A:ALU-41>config>service>ies# exit
7705 SAR OS Services Guide