Table of Contents
Advertisement
Log Management Tasks
Modifying Event Control Parameters
Use the following CLI syntax to modify event control parameters:
CLI Syntax: config>log
The following displays the current event control configuration:
A:ALA-12>config>log# info
----------------------------------------------
...
event-control "" 2014 generate critical
...
----------------------------------------------
A:ALA-12>config>log#
The following displays an example of an event control modifications:
Example
The following displays the log filter configuration:
A:ALA-12>config>log# info
----------------------------------------------
...
...
----------------------------------------------
A:ALA-12>config>log#
Page 356
event-control application-id [event-name|event-number] gen-
erate[severity-level] [throttle]
event-control application-id [event-name|event-number] sup-
press
:
config# log
config>log# event-control
event-control "" 2014 suppress
2014 suppress
7950 SR OS System Management Guide
Advertisement
Table of Contents
