Replacing The Fan (Tube Assembly 1.0) - Sirona ORTHOPHOS XG 3Dready Service Manual

Tab 6
1.
A
Removing the covers
Replacing fan
59 38 399 D3352
D3352.076.01.26.02 09.2016

6.16 Replacing the fan (tube assembly 1.0)

6.16

Replacing the fan (tube assembly 1.0)

Remove the covers (see section 1.13):
– Tube assembly, front
1. Caution: Cable! Loosen the four screws A and carefully remove the cov-
er plate including the fan.
Pull the fan cable off connector X2 from board DX6.
Install the new fan in the reverse order of removal.
ATTENTION: What to do after replacement?
– Check the function of the fan using service routine S005.4
(see section 5.6.3).
– No further action is required.
Connector X2
6 – 53