9 Repair
9.12 Fan (X-ray tube assembly)
412
9.12
Fan (X-ray tube assembly)
9.12.1
Replacing the fan (tube assembly 1.0)
1. Remove the "Rear tube assembly cover".
A
2. NOTICE! Cable! Loosen the three screws (A) and carefully remove
the cover plate including the fan.
3. Pull the fan cable off connector X2 on board DX6.
4. Install the new fan in the reverse order of removal.
Sirona Dental Systems GmbH
Service Manual ORTHOPHOS XG 3D / Ceph
63 03 510 D3352
D3352.076.03.11.02 09.2016