9 Repair
9.7 Fan (X-ray tube assembly)
318
9.7
Fan (X-ray tube assembly)
Fan (X-ray tube assembly)
9.7.1
Replacing the fan
Replacing the fan
1. Remove the "Front tube assembly cover".
A
2. NOTICE! Cable! Loosen the three screws (A) and carefully remove
the cover plate including the fan.
3. Pull the fan cable off of connector X2 on board DX6.
4. Install the new fan in the reverse order of removal.
9.7.2
What has to be done after replacing the fan?
What has to be done after replacing the fan?
➢ Check the function of the fan using service routine S005.4 [ → 225].
Sirona Dental Systems GmbH
Service Manual GALILEOS
61 25 665 D3437
D3437.076.01.15.02 06.2012