Removing The User Interface On The Dentist Element - Sirona TENEO Service Manual

2.
3.
NAB
NAK
61 94 448 D 3509
D 3509.076.01.01.02 07.2008
1.11

Removing the user interface on the dentist element

1.
2.
1. Loosen the setscrew.
2. Unscrew the upper screws of the retaining bracket.
Loosen the lower screws of the retaining bracket.
Turn the right retaining bracket outwards to the right and the left retaining
bracket outwards to the left.
Pull the connector X1 off of the user interface.
3. Unscrew the screw and remove the user interface panel.
i
NOTE
When re-assembling the unit:
Tighten the setscrews 1 and 3 (these are not fastening screws) only until the
user interface panel is fixed in place.
1 Important information
1 – 13