IPv6 Commands
ipv6 neighbor
Configures a static entry in IPv6 Neighbor Table.
ipv6 neighbor ipv6_address hardware_address {if_name} slot/port
no ipv6 neighbor ipv6_address {if_name}
Syntax Definitions
ipv6_address
hardware_address
if_name
slot/port
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the no form of this command to remove an entry from IPv6 Neighbor Table.
Examples
-> ipv6 neighbor 4132:86::203 00:d0:c0:86:12:07 Test 1/1
Release History
Release 6.6.1; command was introduced.
Related Commands
show ipv6 neighbors
show ipv6 information
OmniSwitch 6250 CLI Reference Guide
IPv6 address that corresponds to the hardware address.
MAC address in hex format (e.g., 00:00:39:59:F1:0C).
Name assigned to the interface on which the neighbor resides.
Slot/port used to reach the neighbor.
Displays IPv6 Neighbor Table.
Displays IPv6 information.
November 2009
page 30-13