SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 107

DI02-12
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
14. Install the chain tensioner.
Tightening torque
Y220_02032
15. Install the cylinder head cover assembly.
16. Install the rubber gasket.
Y220_02033
17. Tighten the cylinder head cover bolts.
Notice
• Apply the sealant to the bolts for the vacuum pump
and the timing chain cover.
Tightening torque
Y220_02034
18. Check the parting surface of the #12 bearing cap and the
cylinder head for contacting.
19. Check if the O-ring is installed in the vacuum pump.
20. Install the vacuum pump with the key groove aligned.
21. Tighten the vacuum pump mounting bolts.
Tightening torque
Y220_02037
80 ± 8.0 Nm
10 ± 1.0 Nm
10 ± 1.0 Nm
ENGINE HOUSING
DI ENG SM - 2004.4