SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 423

DTC Trouble
P0697 ECU Supply Voltage Fault
(2.5 V)
P0245 Turbo Charger Actuator
Circuit Fault - Short
P0246 Turbo Charger Actuator
Circuit Fault - Short to B+
P0606 ECU Watchdog Fault
P1607 ECU Injector Cut Fault
P1600 ECU Shut Down Fault
P1601 ECU Fault
P1602 ECU Fault
DIAGNOSIS
DI ENG SM - 2004.4
Help
- Malfunction reference supply voltage
from ECU
• Supply voltage: 2.5 V
- Check the supply voltage to each sen-
sor
• Supply voltage (2.55 V): accelera-
tor pedal sensor 2
- Check the wiring harnesses.
- Replace the ECU if required.
- The waste gate driver circuit is short
to ground or open
- Check the actuator wiring harness.
- Check the solenoid valve.
- Check the ECU wiring harness.
• Check the ECU pin #95 for open and
short.
- Replace the ECU if required.
- The turbo charger actuator power
source circuit is short.
- Check the actuator wiring harness.
- Check the solenoid valve.
- Check the ECU wiring harness for short
and poor contact.
- Replace the ECU if required.
- The ECU is defective.
- Check the chassis ground wiring
harness.
- Check the ECU.
- Replace the ECU if required.
- The ECU is defective.
- Check the chassis ground wiring
harness.
- Check the ECU.
- Replace the ECU if required.
- The ECU is defective.
- Check the chassis ground wiring
harness.
- Check the ECU.
- Replace the ECU if required.
- The ECU is defective.
- Check the chassis ground wiring
harness.
- Check the ECU.
- Replace the ECU if required.
- The ECU is defective.
- Check the chassis ground wiring
harness.
- Check the ECU.
- Replace the ECU if required.
Torque Torque Delayed
Reduction Reduction Engine
(max.50%) (max.20%) Stop
O
O
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DI10-63
Immediately Limp
Engine Home
Stop Mode