Structure Of Ci Type Hfm Sensor - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Intake air temperature sensor is a part of HFM sensor and a thermister and resister and detects air temperature
changes that flow into the engine. There occurs high resistance when temperature is low and low resistance when high
(NTC type).
ECU supplies 5 V to intake air temperature sensor and then measures voltage changes to determine the intake air
temperature. When air in the intake manifold is cold, the voltage is high and air is hot, the voltage is low.
The reason for using HFM sensor is that this sensor is most proper in controlling accurate air-fuel ratio to meet the legal
emission regulations. This sensor measures actual intake air mass into engine very accurately during specific instant
acceleration and deceleration, and determines engine loads and detects intake air pulsation and air flows.
Main functions of HFM sensor are:
• Using for EGR feedback control
• Using for turbocharger booster pressure control valve control
• Using for fuel injecting compensation
CI type HFM sensor: The air flowing the sensor does not directs toward sensing section but flows along with lower wall
after passing protection grid to enhance durability of the sensor. Oil, water and dust less damage the sensor.
Air outlet
INTAKE SYSTEM
DI ENG SM - 2004.4
Air inlet
<Structure of CI type HFM sensor>
DI03-9
Y220_03012
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN