Table of Contents
Advertisement
DI07-48
INJECTOR
The C21 labels including injector characteristics are attached in each injector. These C21 values should be input to ECU
by using Scan-i when replacing the ECU or injectors.
Special cautions:
1. Plug the openings of hoses and pipes with the sealing caps.
2. Replace the copper washer with new one plus injector holder bolt & washer.
3. Tighten the injector holder bolts with the specified tightening torque.
4. Be careful not to drop the injector.
C2I label
C2I value
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Edge filter
Leak off nipple
Nozzle holder body
Bobbin
Control valve
Cap nut
Adaptor plate
Nozzle body
Washer
Nozzle needle
Specifications
Length: · Injector body 181.35 mm
· Injector nozzle 22.155 mm
Nozzle basic: 5 Holes, 146°C Cone Angle,
3
840 mm
/min
Control: PWM type (solenoid injector)
Tightening: Clamping by fork
Fuel return: Nipple
Y220_07100
FUEL SYSTEM
DI ENG SM - 2004.4
Hide quick links:
Advertisement
Table of Contents
