SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 295

27. Install the vacuum modulator to the intake manifold
bracket.
28. Connect the vacuum modulator connecting lines and
connector.
(1) Vacuum modulator for turbo charger control
(2) Vacuum modulator for EGR valve control
Notice
Ensure that the vacuum hoses are connected to
correct positions.
29. Connect the hose to coolant outlet port and tighten the
clamp.
30. Install the air intake duct.
31. Install the fan belt while pressing the auto tensioner
adjusting bolt.
32. Place the fan shroud in its location and install the cooling
fan by using an open end wrench.
Tightening torque
33. Install the fan shroud.
34. Add the coolant.
35. Check all the connections for tightness and pump the
priming pump to deliver the fuel to the transfer line of HP
pump.
36. Start the engine and check if abnormality is present.
37. Run leak detection cycle to get rid of air in the system
using scan 100.
FUEL SYSTEM
DI ENG SM - 2004.4
10 ± 1.0 Nm
DI07-37
Y220_07080
Y220_07081
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN