Draining The Water From Fuel Filter - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Draining the Water From Fuel Filter

1. Place the water container under the fuel filter.
2. Turn the drain plug (2) to "A" direction to drain the water.
3. Press priming pump until all water is drained, then turn
the drain plug to "B" direction to tighten it.
Notice
Be careful not to be injured by surrounding
equipment during the working procedures.
4. Press the priming pump until it becomes rigid.
5. Start the engine and check the conditions.
6. Clear the fault code of ECU with scan 100.
WARNING
If the priming pump is not properly operated, air may
get into the fuel line. It may cause starting problem
or fuel system problem. Make sure to perform the
job in step 4.
FUEL SYSTEM
DI ENG SM - 2004.4
DI07-5
Y220_07004
Y220_07005
Y220_07006
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN