Turbo Charger Assembly
- Removal and Installation
1. Remove the drain plug and drain the engine oil from the
oil pan.
Installation Notice
Tightening torque
2. Remove the vacuum hose and inlet hose from the turbo
charger.
Installation Notice
Tightening torque
3. Remove the bolts and nuts at the exhaust manifold in
turbo charger.
Installation Notice
Tightening torque
4. Remove the lower and upper bolts at turbo charger oil
supply pipe.
Installation Notice
Tightening torque
EXHAUST SYSTEM
DI ENG SM - 2004.4
25 ± 2.5 Nm
6 ~ 7 Nm
25 ± 2.5 Nm
23 ± 2.3 Nm
DI04-25
Y220_04015
Y220_04016
Y220_04017
Y220_04018
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN