Composition Of Imv - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Composition of IMV

The IMV is located on the hydraulic head of the pump. It is fed with fuel by the transfer pump via two radial holes. A
cylindrical filter is fitted over the feed orifices of the IMV. This makes it possible to protect not only the LP actuator, but
also all the components of the injection system located downstream of the IMV.
The IMV consists of the following components:
• A piston held in the fully open position by a spring.
• A piston filter located at inlet.
• Two O-rings ensuring pressure tightness between the hydraulic head and the body of the IMV.
• A body provided with two radial inlet holes and an axial outlet hole.
• Coil
High pressure
Outlet hole
FUEL SYSTEM
DI ENG SM - 2004.4
Transfer pump
Fuel
Filter
O-ring
Fuel
Transfer pump
DI07-15
Solenoid
Spring
Piston
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Y220_07019