SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 148

12. Remove the HP pump mounting bracket.
Installation Notice
Tightening torque
13. Unscrew the external bolts and remove the HP pump
while rocking and tapping it with a rubber hammer.
Notice
• To prevent HP pump shaft damaging, do not apply
excessive impact.
• Do not apply excessive force. The timing chain may
deviates.
14. Remove the HP pump.
15. Install the new HP pump with sealing caps.
Notice
Remove the sealing caps only when connecting the
pipes and hoses.
16. When replaced the HP pump, initialize the fuel pressure
by using SCAN-100. Refer to "Trouble Diagnosis" section
in this manual.
ENGINE HOUSING
DI ENG SM - 2004.4
24 ± 2.4 Nm
DI02-55
Y220_02143
Y220_02144
Y220_02145
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN