Ecu - Removal And Installation - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

ECU - Removal and Installation

1. Flip up the front passenger's seat and remove the ECU
cover nuts.
2. Remove the ECU bracket nuts.
3. Unscrew the ECU connect bolt and remove the ECU
assembly.
4. Install in the reverse order of removal.
5. Backup the below data with Scan-i when replacing the
ECU.
- Current ECU data
- Vehicle Identification Number (VIN)
- Variant coding data
- Then, input the data into new ECU. For immobilizer
equipped vehicle, additional coding operation is
necessary.
ENGINE CONTROL SYSTEM
DI ENG SM - 2004.4
DI08-11
Y220_08005
Y220_08006
Y220_08007
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN