Construction Of Turbo Charger - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Construction of Turbo Charger

The turbine wheel in turbo charger and compressor wheel are installed at each side of the shaft. It is comprised with the
shaft supporting center housing (supporting the compressor with two float journal bearings), the turbine side parts of
Turbine Wheel, Shroud and Turbine Housing, and the compressor side parts of compressor wheel, back plate and
compressor housing.
• The turbine rotates turbine wheel by receiving exhaust gas energy from the engine.
• The compressor receives torque energy from the turbine and the compressor wheel inducts air to force it inside of
the cylinder.
1. Turbine housing
2. Turbine wheel
3. Compressor housing
4. Compressor wheel
5. Center housing
6. Turbo charger booster pressure control valve
7. Control link
8. Bypass flap
EXHAUST SYSTEM
DI ENG SM - 2004.4
A. Air inlet (from atmosphere)
B. Exhaust gas inlet (from cylinder)
D. Exhaust gas outlet (to atmosphere)
E. Exhaust gas bypass passage
H. Oil supply opening
J. Oil return line
DI04-7
Y220_04009
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN