SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 91

DI01-56
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
28. Pull out the pin and remove the timing chain guide from
the engine.
Y220_01120
29. Remove the cylinder head bolts according to the
numerical sequence.
Installation Notice
Tightening torque
M8 x 25: 2 EA
M8 x 50: 2 EA
M12 x 177: 11 EA
M12 x 158: 1 EA
(Vacuum pump side)
Y220_01121
30. Measure the length of cylinder head bolts.
• If the maximum length is exceeded by 2 mm, replace
the cylinder head bolt.
Length when new
Y220_01122
31. Remove the cylinder head.
Notice
• Inspect the cylinder head surface.
• Store the removed injectors and glow plugs so that
they will not be damaged.
Y220_01123
25 ± 2.5
25 ± 2.5
85 ± 5 Nm,
3 x 90° + 10°
Maximum Limit
177 mm
158 mm
Nm
179 mm
160 mm
ENGINE ASSEMBLY
DI ENG SM - 2004.4