SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 293

13. Check if the mark on the intake camshaft is at the correct
position through oil filler opening.
Notice
Rotate the bolt on crankshaft damper pulley two
revolutions and check if the mark on the intake
camshaft is at the correct position.
14. Clean the timing chain cover parting surface and apply
the sealant on it.
15. Install the timing chain cover.
Notice
Align the cover and the guide pin.
Tightening torque
16. Install the auto tensioner assembly.
- Upper bolt (24M):
Tightening torque
- Lower bolt(13M):
Tightening torque
FUEL SYSTEM
DI ENG SM - 2004.4
10 ± 1.0 Nm
82 ± 6.0 Nm
32 ± 3.0 Nm
DI07-35
Y220_07073
Y220_07074
Y220_07075
Y220_07076
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN