SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 103

DI02-8
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
8. Remove the cylinder head bolts according to the
numerical sequence.
M8 x 25
M8 x 50
M12 x 177 : 11 EA
M12 x 158 : 1 EA
Y220_02016
9. Measure the length of cylinder head bolts.
• If the maximum length is exceeded by 2 mm, replace
the cylinder head bolt.
Length when new
Y220_02017
10. Remove the cylinder head.
Notice
• Inspect the cylinder head surface.
• Store the removed injectors and glow plugs so that
they will not be damaged.
Y220_02018
11. Measure the piston protrusion from the parting surface.
• Specified Value: 0.765 ~ 1.055 mm
Y220_02019
: 2 EA
: 2 EA
(Vacuum pump side)
Maximum Limit
177 mm
158 mm
179 mm
160 mm
ENGINE HOUSING
DI ENG SM - 2004.4