SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 448

2. Diagnosis Procedures (check sensor (1))
Read DTC
Fault in sensor supply voltage?
NO
Check sensor wiring
Wiring Problem?
NO
Visually check sensor
Sensor Problem?
NO
Check ECU wiring
Wiring Problem?
NO
DIAGNOSIS
DI ENG SM - 2004.4
YES
Sensor problem caused by supply voltage.
Locate the problem while disconnecting the
sensor connector one by one. If not a sen-
sor problem, check the sensor supply volt-
age circuit for open and short.
YES
Repair or
replace
YES
Replace
sensor
YES
Repair or
replace
NO
Check wiring and insulation
Wiring Problem?
NO
Replace sensor
Trouble Continues?
NO
Repiar Completed
DI10-89
YES
Repair wiring
YES
Replace ECU
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN