Water Pump Housing
Preceding Works:
- Removal of water pump assembly
- Removal of thermostat assembly
1. Remove the heater hose.
2. Unscrew the bolts and remove the alternator.
Installation Notice
Tightening torque
3. Unscrew the bolts and remove the alternator bracket.
Installation Notice
Tightening torque
4. Unscrew the bolts and remove the water pump housing.
Installation Notice
Tightening torque
Notice
• Be careful not to damage the O-ring in coolant outlet
pipe (cylinder head side).
• Remove the gasket residues from the sealing
surface and replace the gasket with new one.
5. Install in the reverse order of removal.
COOLING SYSTEM
DI ENG SM - 2004.4
46 ± 4.6 Nm
25 ± 2.5 Nm
10 ± 1.0 Nm
DI06-23
Y220_06044
Y220_06045
Y220_06046
Y220_06047
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN