HFM Sensor - Removal and Installation
HFM sensor
Preceding Work: Disconnection of negative battery cable
1. Disconnect the negative battery cable.
2. Loosen the clamps on the air cleaner and the turbo
charger and remove the duct.
3. Unscrew the bolts and remove the HFM sensor assembly.
Tightening torque
INTAKE SYSTEM
DI ENG SM - 2004.4
10 ± 1.0 Nm
DI03-11
Y220_03014
Y220_03015
Y220_03016
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN