Crankshaft - Disassembly - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Crankshaft - Disassembly

1. Unscrew the bolts and remove the connecting rod journal
bearing and bearing caps.
Notice
Position the #1 piston at TDC and remove the piston
connecting rod journal bearing caps.
2. Remove the bearing cap bolts.
3. Remove the bearing caps.
Notice
• The crankshaft bearing caps are marked with
stamped numbers. Start to remove from the
crankshaft pulley side.
• Do not mix up the bearing shells.
4. Remove the bearing caps and lower thrust bearing.
5. Separate the lower bearing shells from the bearing caps.
6. Remove the crankshaft.
7. Remove the upper thrust washers.
8. Remove the upper bearing shells from the crankcase.
Notice
Do not mix up the bearing shells.
ENGINE HOUSING
DI ENG SM - 2004.4
DI02-39
Y220_02102
Y220_02103
Y220_02104
Y220_02105
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN