Cylinder Head Pressure Leakage Test - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

DI02-4
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN

Cylinder Head Pressure Leakage Test

Preceding Works:
- Removal of cylinders
- Removal of intake and exhaust manifold
- Removal of valves
Test Procedures
1. Place the pressure plate on a flat-bed work bench.
Y220_02003
2. Install the cylinder head on the pressure plate.
Tightening torque
3. Immerse the cylinder head with the pressure plate into
warm water (approx. 60°C) and pressurize with
compressed air to 2 bar.
Notice
Examine the cylinder head for air bubbling. If the air
bubbles are seen, replace the cylinder head.
Y220_02004
60 Nm
ENGINE HOUSING
DI ENG SM - 2004.4