Exhaust Manifold - Removal And Installation - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Exhaust Manifold
- Removal and Installation
1. Remove the two intake hoses from the turbo charger.
2. Remove the turbo charger assembly (refer to Turbo
Charger section).
3. Remove the #3 pipe of EGR valve from the exhaust
manifold.
Notice
The #3 pipe of EGR valve is exposed to the high
temperature and pressure of exhaust gas. Replace
the gasket and pipe with new ones. Otherwise, it may
cause the leakage of exhaust gas.
Tightening torque
4. Unscrew the nuts and remove the exhaust manifold and
gasket.
Tightening torque
Notice
Replace the gasket with new one.
5. Install in the reverse order of removal.
EXHAUST SYSTEM
DI ENG SM - 2004.4
35 ± 3.5 Nm
40 ± 4.0 Nm
DI04-5
Y220_04003
Y220_04004
Y220_04005
Y220_04006
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN