Oil Filter And Cooler - Removal And Installation - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

DI05-12
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Oil Filter and Cooler
- Removal and Installation
Preceding Works:
- Draining of engine oil
- Removal of EGR vacuum modulator bracket
1. Remove the oil cooler hoses (supply and return lines).
Y220_05012
2. Disconnect the ground cable from the oil pressure switch.
Y220_05013
3. Remove the oil cooler and filter mounting bolt.
Notice
Pay attention to the length of bolts.
Tightening torque
Y220_05014
4. Remove the oil cooler and filter assembly from the cylinder
block.
Notice
The oil cooler and filter assembly cannot be replaced
separately.
Y220_05015
23 ± 2.3 Nm
LUBRICATION SYSTEM
DI ENG SM - 2004.4